top of page

Busy End to 2026! - November Update 2026

Nov 2
5 min read

JB Data Engineering logo

Training Support - Can We Help?




Hello and welcome to the JB Data Engineering November Update.


Wow! What a busy (almost) end to the 2026 season! October proved to be one of our most active months of the year with two trips to Barcelona, a Teams Championship to celebrate and a packed weekend at Snetterton for the GT Cup Championship with SVG Motorsport.



October began with the first of two visits to the Circuit de Barcelona-Catalunya in Spain for the final weekend of the SRO Motorsports Group GT3 Revival Series where we were back with Pyro Motorsport and its #46 Audi R8 LMS driven by ex-BTCC racer Jeff Smith. After a podium in the Am Gen 2 class last time out at the Nürburgring, we had high hopes that we would finish the season on a high.


Above: Jeff Smith at the wheel of the #46 Pyro Motorsport Audi R8 LMS - Circuit de Catalunya - October 2026 (Photo: GT3 Revival Series)

Above: Jeff Smith at the wheel of the #46 Pyro Motorsport Audi R8 LMS - Circuit de Catalunya - October 2026 (Photo: GT3 Revival Series)


After lapping in 2:00.157 in the first qualifying session, fourth quickest in the class, the #46 car looked like it had the pace for another strong result in the first of the weekend’s two 50-minute races. However, a brake issue put Jeff into the barrier as the field was circulating behind the safety car at the start. The team was unable to repair the damage in time to get the car out again over the weekend so unfortunately our 2026 campaign concluded in the Spanish rain.


Above: Jeff Smith at the wheel of the #46 Pyro Motorsport Audi R8 LMS - Circuit de Catalunya - October 2026 (Photo: GT3 Revival Series)

Above: Jeff Smith at the wheel of the #46 Pyro Motorsport Audi R8 LMS - Circuit de Catalunya - October 2026 (Photo: GT3 Revival Series)


Jeff and the #46 Audi finished 14th in the Am Gen 2 standings, a fantastic result given that the team only saw the chequered flag twice in 2026. Despite disappointment in Spain, Jeff is already starting to plan for next season and if everything goes to plan, we very much look forward to joining the GT3 Revival Series grid again in 2027. Thank you very much to everyone at Pyro Motorsport for making us feel so welcome in 2026.



There was both success and disappointment for SVG Motorsport when JB Data Engineering joined the team for the final weekend of the 2026 GT Cup Championship season. With the #888 GTH Ginetta G56 Evo driven by Marc Elman and Cameron Pratt-Thompson on the grid alongside the #24 BMW M2 CS piloted by Ian Astley and, substituting for Neil Wallace, Alex Toth-Jones, it was going to be a busy weekend with four races spread across the two days.


Above: SVG Motorsport at Snetterton - October 2026 (Photo: SVG Motorsport)

Above: SVG Motorsport at Snetterton - October 2026 (Photo: SVG Motorsport)

A mechanical issue caused the #24 BMW to fail to finish both of Saturday’s races and the car was unable to make it out for Sunday. The #888 Ginetta, however, recorded two podium finishes over the course of the weekend, securing fourth place in the GTH Championship standings for Marc and Cameron, just nine points behind the third-place finishers.

 

The #24 BMW finished the season second in the GTA standings with SVG Motorsport completing a top three finish in the teams’ standings for 2026.


Above: JB Data Engineering in action with SVG Motorsport at Snetterton - October 2026 (Photo: SVG Motorsport)

Above: JB Data Engineering in action with SVG Motorsport at Snetterton - October 2026 (Photo: SVG Motorsport)


JB Data Engineering has thoroughly enjoyed working with SVG Motorsport this season and the final standings results reflect the huge amount of work that everyone has put in during 2026. We very much hope to return with SVG Motorsport in 2027.



The month finished with a second trip to Barcelona, this time for the season finale of International GT Open with Greystone GT. The three-car entry of Andrey Borodin and Ollie Webb in the #24 PROAM McLaren 720S GT3 Open and the two PRO entries of Zac Meakin and Dean MacDonald in the #33 McLaren and McKenzy Cresswell and Callum Davies in the #44 car meant that this was always going to be an intense, busy weekend.


Above: The #24 Greystone GT McLaren 720S driven by Andrey Borodin and Ollie Webb - Circuit de Catalunya, Barcelona - October 2026 (Photo: International GT Open)

Above: The #24 Greystone GT McLaren 720S driven by Andrey Borodin and Ollie Webb - Circuit de Catalunya, Barcelona - October 2026 (Photo: International GT Open)


It was another solid weekend for the Greystone crew with an overall victory in Race Two for Zac and Dean, resulting in second place in the Drivers’ Standings for Zac and third place for Dean. McKenzy and Callum finished in fourth and fifth with McKenzy finishing 10th in the Pro class. Finally, Andrey and Ollie finished the season 21st in the PROAM category and, of course, Greystone GT finished at the top of the Teams’ Standings table, a fantastic achievement!


Above: Greystone GT - 2026 Interntional GT Open Teams Champions!  (Photo: International GT Open)

Above: Greystone GT - 2026 Interntional GT Open Teams Champions!  (Photo: International GT Open)


Working with Greystone GT in 2026 has been an absolute pleasure and we can’t wait to pick up where we left off when we go racing again next season. Roll on 2027!


Unlock Your Hardware: Data & Video System Training with JB Data Engineering


Investing in high-end data acquisition or onboard video is only half the battle—knowing how to extract actionable performance from it is what wins championships. Whether you’re running a brand-new car build or looking to get more out of your existing setup ahead of the 2027 season, JB Data Engineering provides comprehensive, hands-on training tailored to your needs. At JB Data Engineering, we’ve always believed that you can’t manage what you don’t measure. For many track day enthusiasts and club racers, however, the hurdle to professional-grade data acquisition has always been hardware complexity, time-consuming setups and a working understanding of how to interpret the information at your fingertips.


Two Ways We Support Your Development


In the Workshop: Ideal for new hardware setups, software integration, or winter rebuilds. We come directly to your workshop to configure laptops, establish ECU communication, set up custom display pages, and teach you correct procedures—preventing costly mistakes before you hit the circuit.

Trackside Support & Live Coaching: Perfect for test days and race weekends. We sit alongside you between sessions to streamline your workflow, analysing delta lap times, overlaying driver telemetry, setting critical engine alerts and teaching you what metrics to prioritise under race weekend pressure.



From complete ground-up system setup to refined trackside analysis, our goal is to build your confidence so you can get the maximum return on your data investment.


Planning winter testing or starting a new build project for 2027? Contact JB Data Engineering today to book your workshop or trackside training session.


Wrapping Up the 2026 UK Season

JB Data Engineering joins the Britcar Endurance Championship paddock this weekend for the final round of the 2026 season - the Brands Hatch ‘Into The Night’ event. If you’re planning on being at Brands Hatch at the weekend for what promises to be a spectacular race, we hope our paths cross in the paddock!


After a busy year which has seen us working across Europe as well as supporting a packed domestic programme, we are now working on locking in our 2027 schedule. With experience across GTs, prototypes, single-seaters and all forms of touring cars, JB Data Engineering can provide the expert input that will help make your 2027 campaign a success!



Please call on 00 (44) 7717 562169 or email Jordan@jbdataengineering.co.uk to discuss availability and dates.



JB Logo

Have a great November!

The JB Data Engineering Team.



Jorda



Jordan

bottom of page